Aerial Technical Requirements

• Each piece of aerial equipment (eg. Tissu) must be rigged from a fixed, structural point(s) with an approved weight allowance for a minimum load of 500 kilograms. This point(s) must be rigid i.e. from structural beams in the ceiling or from fixed truss.

• A height of 5 to 10 metres is required from the rigging point(s) to performance floor.

• The rigging point(s) need to be accessed using a high worker (hogewerker / cherry picker) with operator or an approved technical rigger (provided by the organisation) can be used. A ladder can be used for lower heights.

• The aerial equipment (Tissu) must hang free from any aerial obstacles.
  Ideally with a minimum of 5m away from any obstacle; aerial or floor.

• The exact height and type of hanging point should be approved by the technical representative and performers before the booking is confirmed.  Therefore we require direct contact with a technical representative from the organisation who can confirm the above technical requirements.
  

 

Please refer to the Technical Requirements for full information (.pdf download).